Now that I’m a homebrewer and it all comes so easily to me I figured that I might as well brew up another batch while the first is carbonating in the bottles. So I stopped at my local brewing store (Wine & Hop Shop) and picked up a kit called Bumblebee Honey Ale. I chose a honey ale for several reasons:
- I enjoy New Glarus’ Cabin Fever Honey Bock and Leinenkugel’s Honey Weiss
- My wife enjoys honey beers.
- Brewing beers my wife enjoys helps justify my brewing endeavors.
- It’s almost summer and a honey ale would be refreshing on a hot afternoon.
I bought the kit and a couple other things to help with the hydrometer reading and I was ready to brew!
So on Saturday afternoon while the kids were napping and when I should have been mowing the lawn I brewed instead! This beer has a 45 minute boiling time. The 1 oz. of Cascade hops get added at the start. Then after 35 minutes a half ounce of the Czech Saaz hops are added. And finally after 45 minutes the rest of the Czech Saaz hops and the two pounds of honey are added.
Before I brewed my first batch I was incredibly nervous. Everything seemed so complicated, so detail oriented, and seemingly required perfection. This time around I just got to it.
One of the lessons I learned the first time around is how to better control the heat from the turkey fryer. During the first batch it kept foaming up. This time I was able to recognize when that would happen and I turned down the heat to avoid that.
As it was boiling my daughter woke up and came outside. When she got a sniff of the wort she said, “Ooh, yummy!” I’m not sure what to read into that. But I was happy that it smelled good to her. Later though, when I added the Czech Saaz and it smelled more hoppy, she changed her opinion and said, “PU!”
Overall this second brew went very well. I was able to refine my process and speed things up. I didn’t make as many mistakes. And I had a lot more fun. It’s already bubbling like crazy, which is a joy to watch. Seriously, I could sit in my basement and watch bubbles move through the fermentation lock for an unhealthy amount of time. I even took a video of the bubbles.
So the beer is fermenting nicely in the plastic Ale Pail. Next weekend I’ll switch it over to the glass carboy. I’m hoping to have this beer bottled and ready to go by the end of June. I may even bring some to GenCon in August (unless I drink it all by then)!
The only question is what I should name it. I am naming all of my beers after Renaissance men since I consider myself to be a mediocre one. My first beer I named after Leon Battista Alberti. I’m thinking I might go with something like “Ben Franklin’s Honey” for this one. I hope it turns out to be delicious, no matter what I name it!
If you’ve been following this blog then you know I’ve purchased my first beer brewing kit. 2013 just seems like a great year to get started. I’ve wanted to brew for about 5 years now. So it’s about time I leveled up in Manliness and actually brewed.
Two Saturdays ago I connected my propane tank to my turkey fryer and boiled some wort! It was an interesting learning process and I’m proud to be able to report on it today on B&B!
Some of us who run, and by “us” I mean “you,” have experienced something known as Raceday Nerves. It’s where you’re all nervous before you start a race. I’ve been there too. I ran a couple half marathons two years ago and have definitely had those butterflies. Why do I bring that up? Because for some reason I had a little pre-brew jitters. I guess it was because I was hoping to not mess up.
There was nothing I could do about the nerves so I just got to it. Here’s my homebrew setup:
It looks all shiny and new there. That lasted about 3 minutes until the flames started to cause the black paint on the turkey fryer stand to bubble, crack, and burn away! Yikes. And of course as the paint and the bolts were flaming my neighbor walked up and asked what I was up to.
Who wants to boil some Wort?
For my first brew I wanted it to be as simple as possible. That means I was brewing with a pre-made extract. This is a liquid that comes in a half gallon jar. You can see it over there →
Brewing this way is pretty “easy.” You just boil the wort for about 40 minutes, then cool it, put it in the fermenter and add the yeast.
Eventually I will get to the point where I’ll be choosing the grains and hops that I use so that I can brew actual, legit home recipes. But as a first timer I think I made a good choice.
In some ways it relates to board game design. I could have chosen to go with a complicated all-grain brew and thrown a bunch of awesome stuff in there. But it probably wouldn’t have all worked together, especially on the first try.
In board game design it seems like it would make sense to put a bunch of awesome mechanics together and expect an awesome game. But what ends up happening is you get a game where things feel non-thematic, unrelated, and almost like they’re work. *Cough* Archipelago *Cough*
So I didn’t want to put a bunch of awesome stuff together and hope for the best. I took this first batch as an opportunity to learn a little bit!
Gettin’ Hot in the Pot
With my wort warmed up and the water boiling I was ready to begin! I was pretty nervous about this part. Reading through the directions it was pretty clear that this part could involve a “foam over,” not to be mistaken with a comb over.
Fortunately my turkey fryer is a 7.5 gallon pot and I was only boiling 2 gallons of water and the wort. There were a few times that the foam rose up near the top. If I had been boiling it on the stove it definitely would have foamed over.
By using the knob on the turkey fryer it was pretty easy to control the heat to the pot. Therefore any time I saw the foam building I was able to turn down the heat just a bit and watch the foam dwindle. I was really thankful that I paid for the turkey fryer since it gave me so much peace of mind when boiling the wort.
Here a peek into the pot:
When the wort started boiling I added the Willamette hops. After 30 minutes I added a half ounce of Kent Golding hops. And then after 8 more minutes I added another half ounce of the Kent Golding hops. And two minutes later it was done!
Am I a Brewer Yet?
Once the wort was boiled and the nervous part was over with it was time to cool the wort. I filled my utility sink full of ice water and placed the whole pot right in there on a metal trivet. With active stirring it cooled the wort pretty quickly. In a previous article I had mentioned making a wort chiller. I may still do that, but this cooled it down in about 12 minutes.
The next part was a little tricky too. It was time to transfer it over to the fermenter, which is a fancy word for plastic bucket. Without much hesitation I poured it right in. It felt really good to be done with the boiling portion of the brewing process.
Here’s what I left behind in the pot:
So the beer was brewed. What’s next?
The Waiting Game
With the boiled wort in the plastic bucket (I just can’t call it a fermenter) it was time to wait. I was super excited about the waiting game. I was really looking forward to seeing some bubbles coming through the fermentation lock.
I was prepared to see no bubbles. My confidence in my brewing ability was so high that I was expecting to fail.
Fortunately a day later I saw the first bubbles! It was a great moment in my life. I put it right up there with taking the ACT for the fourth time in high school and that moment in baseball practice when I got hit, well… you know where.
So the bubbles, while exciting, really weren’t much to look at. I figured they would happen. I was just slightly worried that it would foam over through the fermentation lock.
Thankfully it did not. And I was able to move onto the second stage of fermentation… the Carboy!
Carboy is a Cool Word
So the next step is to transfer the beer over to the glass carboy. This doesn’t have to be done, but all the books and experts make it sound like it’s the right thing to do. So I did it.
I had purchased an auto siphon, which really made the transfer pretty easy. I hoisted the bucket up on a box and cracked it open. It really smelled good! I put the siphon in the bucket, being careful to keep it off the bottom, and then pumped and let it do its work.
Here’s how it looked during siphoning and after all was said and done:
I AM a Home Brewer! What’s with “Alberti?”
So at this point my beer has been in the carboy for about 4 days. It is a little cold in my basement where it is fermenting and I think that has caused it to ferment less than it perhaps should have. But the bottom line is that there are several gallons of my own beer sitting in my basement!
So the next step will be bottling at some point in the next week or so. That should be interesting. I bought a bottom up bottle filler, though. That should help the process a bit!
So why did I name it “Alberti Amber?” This beer is named after Leon Battista Alberti, who was a 15th century Renaissance man. I like to consider myself sort of a Mediocre Renaissance Man and so it’s fun to name these beers after men I look up to. Alberti is a favorite renaissance man of mine due to his Alberti Cipher work in cryptography. I have a little man crush on unsolved ciphers and maybe my beer will help me solve some of them. Probably Not.
So it’s been a fun, if nerve-wracking, process brewing my first batch of beer. I think the second time will go much smoother. Or at least I’ll be more comfortable with it. All I have to do is figure out what style of beer I want to brew next! Helmholtz Honey Bock? Franklin Cream Ale? We shall see!
My wife uses Pinterest and every once in a while she finds something that might be of interest to me. Since what she shared with me is interesting and relevant to this site I am posting it here. You can find the original over at visual.ly.
If you plan to consume any beverages of the beer variety tomorrow during Table Top Day, pull out one of these tasty little morsels of info to impress your friends! Check this out: